In GeoJSON, in which order are coordinates written?
Q2
Why is "distance = √(Δlat² + Δlon²)" in degrees wrong for comparing distances?
Q3
About how many kilometres is one degree of latitude?
Q4
What does the Mercator projection preserve, and what does it distort?
Q5
Which projection type should a world choropleth of rates per area usually use?
Q6
A map colours districts by the total number of respiratory cases. What is the main risk?
Q7
Which idiom is most appropriate for showing the number of trips starting at each bike station on a map?
Q8
A choropleth uses equal-interval classes on a very skewed variable (one district far above the others). What typically happens?
Q9
What is a known weakness of quantile classification?
Q10
The modifiable areal unit problem means that:
Q11
Districts with more bike lanes have lower obesity rates. Concluding that each person who lives near bike lanes is less likely to be obese is an example of:
Q12
Why is TopoJSON often smaller than GeoJSON for district boundaries?
Q13
In a force-directed node-link layout, what does the distance between two nodes mean?
Q14
For a dense network of 200 stations with thousands of links, which representation usually works better for finding clusters and checking whether two nodes are connected?
Q15
A directed network has 5 nodes and 9 links. What is its density?
Q16
Which metric identifies a station that acts as a bridge between otherwise separate parts of the network?
Q17
What is the strength (weighted degree) of a station?
Q18
What visual problem does edge bundling address?
Q19
How does a treemap encode a hierarchy?
Q20
Why were squarified treemap layouts introduced after slice-and-dice?
Q21
What do treemaps support poorly?
Q22
Which Altair mark draws GeoJSON region shapes?
Q23
Thousands of bike trips are drawn as straight lines between stations on a city map, producing an unreadable mass. Which redesign best supports "where are the main flows?"
Q24
Which projection do web tile maps such as OpenStreetMap and Google Maps use?
Q25
A cartogram distorts region sizes in proportion to a variable such as population. What is its main advantage and its main cost?
Q26
Why can a smoothed heat map of 60 PM2.5 sensors mislead citizens?
Q27
Which hierarchy idiom best shows depth (how many levels) while still using space efficiently?
Q28Short answer
Respiratory cases and populations for six districts are: Lucheng 420 / 700,000; Ouhai 150 / 450,000; Longwan 300 / 200,000; Dongtou 20 / 90,000; Ruian 360 / 1,200,000; Yueqing 250 / 1,400,000. Compute rates per 10,000, classify them into three equal-interval and three quantile classes, and explain which map you would publish and why.
Q29Short answer
For the CityPulse bike network (80 stations, 2,500 station pairs with at least one trip per week), compare a node-link diagram on a map, a force-directed node-link diagram, and an adjacency matrix for these tasks: (a) find the busiest corridors; (b) find clusters of stations used together; (c) follow how a rider could get from station X to station Y. Recommend a combination.
Q30Short answer
Energy use: Lucheng (Library 300, City Hall 200), Ouhai (Gym 150, School 250, Pool 50), Longwan (Airport 50), total 1,000 kWh. Compute a slice-and-dice treemap on a 100 × 60 canvas (districts split the width, buildings split the height), give the worst aspect ratio, and say how a squarified layout and a bar chart would compare for the tasks "share of each district" and "is the School larger than the Library?".